MI 60

Drilling machine for water and mining, seismic, coring and geothermal research to increase depth, it can in fact reach 1500 m and it is possible to access both the plant and the high capacity compressor. The installation can be on a truck or semi-trailer and in the case of maneuvering also 9 m rods. The pride of our production in terms of capacity remains in any case a very flexible machine, allows in fact to work with various drilling systems: turn and turn a mud, direct drilling and back to hammer bottom hole. The drilling machine is also equipped with electric controls that can be activated in case of need even at a distance.

Dashboard

MI 60Work Methods

  • Rotation With Direct Circulation
  • Nucleus Destruction With Bleeding By Water, Mud And Foam
  • Rotation With Down The Hole Hammer
  • Reverse Circulation
  • Coring

Power PackEngine Power From 394 Hp (294 KW) To 831 Hp (620 KW)Fuel TankCapacity From 300 Litri (79 Gal) To 600 Litri (158 Gal)Sliding Mast (Optional)Stroke 2250 Mm (7 Ft 5”)Mast

  • Maximum Stroke Of Rotary Head 10,6 M (34 Ft 9”)
  • Maximum Pull Up 54000 DaN (121400 Lbf) – Pull Down 26000 DaN (58450 Lbf)

Rotary Head

  • Model TM60: Maximum Torque 34335 Nm (25324 Lbf•Ft) – Maximum Speed 145 Rpm
  • Model TM20CR12: Maximum Torque 10200 Nm (7523 Lbf•Ft) – Maximum Speed 1200 Rpm

Winch

  • Standard: Maximum Line Pull 10000 DaN (22045 Lbf)
  • Optional: Maximum Line Pull 15000 DaN (33068 Lbf)
  • Wire-Line: Maximum Line Pull 1300 DaN (2922 Lbf) – 1360 M (4462 Ft) Of Rope – 93 M/Min (305 Ft/Min)

Double Hydraulic Clamp

  • Model MS520: Maximum Passage 520 Mm (20”)
  • Model MS620: Maximum Passage 620 Mm (24”)

Media