MI 50

Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1100 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust construction does not prejudice its versatility. The rig can be used with all the main drilling methods: direct and reverse circulation by mud and by down the hole hammer. It can be operated remotely.

Dashboard

MI 50
Work Methods
  • Rotation With Direct Circulation
  • Nucleus Destruction With Bleeding By Water, Mud And Foam
  • Rotation With Down The Hole Hammer
  • Reverse Circulation
  • Coring
Power Pack Engine Power From 394 Hp (294 KW) To 831 Hp (620 KW)
Fuel Tank Capacity Da 300 Litri (79 Gal) To 600 Litri (158 Gal)
Sliding Mast (Optional) Stroke 2250 Mm (7 Ft 5”)
Mast
  • Maximum Stroke Of Rotary Head 10,6 M (34 Ft 9”)
  • Maximum Pull Up 50000 DaN (112400 Lbf) – Pull Down 23300 DaN (52380 Lbf)
Rotary Head
  • Model TM50: Maximum Torque 23500 Nm (17333 Lbf•Ft) – Maximum Speed 150 Rpm
  • Modello TM20CR12: Maximum Torque 10200 Nm (7523 Lbf•Ft) – Maximum Speed 1200 Rpm
Winch
  • Standard: Maximum Line Pull 8000 DaN (17986 Lbf)
  • Optional: Maximum Line Pull 10000 DaN (22045 Lbf)
  • Wire-Line: Maximum Line Pull 1300 DaN (2922 Lbf) – 1360 M (4462 Ft) Di Fune – 95 M/Min (305 Ft/Min)
Double Hydraulic Clamp Model MS520: Maximum Passage 520 Mm (20”)

Media