MI 40

Drilling rig for water wells, mineral explorations, seismic, coring and deep geothermal applications. Although its moderate dimensions it has high technical characteristics in terms of pull up and torque: for this reason the rig able to reach high depths (around 800 m). It is possible to work by mud pump 71/2×8 which vastly improves drilling also in bad terrain conditions. Its versatility permits to adopt various drilling methods: direct and reverse circulation by mud and by down the hole hammer. The rig can be either crawler or truck mounted and it can be operated remotely.

Technical Data

Dashboard

MI 40Work Methods

  • Rotation With Direct Circulation
  • Nucleus Destruction With Bleeding By Water, Mud And Foam
  • Rotation With Down The Hole Hammer
  • Reverse Circulation
  • Coring

Power PackEngine Power From 360 Hp (265 KW) To 588 Hp (432 KW)Fuel TankCapacity From 300 Litri (79 Gal) To 600 Litri (158 Gal)Sliding Mast (Optional)Stroke 2250 Mm (7 Ft 5”)Mast

  • Maximum Stroke Of Rotary Head 8,4 M (27 Ft 7”)
  • Pull Up 38000 DaN (85432 Lbf) – Pull Down 20630 DaN (46380 Lbf)

Rotary Head

  • Model TM25: Maximum Torque 23500 Nm (17333 Lbf•Ft) – Maximum Speed 100 Rpm
  • Model TM20CR12: Maximum Torque 10200 Nm (7523 Lbf•Ft) – Maximum Speed 1200 Rpm

Winch

  • Standard: Maximum Line Pull 8000 DaN (17986 Lbf)
  • Optional: Maximum Line Pull 10000 DaN (22045 Lbf)
  • Wire-Line: Maximum Line Pull 1300 DaN (2922 Lbf) – 1360 M (4462 Ft) Of Rope– 93 M/Min (305 Ft/Min)

Double Hydraulic ClampModel MS520: Maximum Passage 520 Mm (20”)

Media