POWERFUL HYDRAULICS

Removable auxiliary (rear) winch has hydraulic quick disconnects.

For greater productivity and control, multiple pump hydraulic circuit allows simultaneous function.

Piston winch motor provides smooth and precise hoisting.

Main and available auxiliary winch are equally matched in size and performance.

Provisions for the future installation of the auxiliary winch are standard.

TELEMATICS. YOU OWN THE DATA!

CELLULAR-BASED DATA LOGGING AND MONITORING SYSTEM THAT PROVIDES:

Viewing options for sharing data with distributor and Link-Belt.

Location and operational settings.

Monitor routine maintenance intervals.

Crane and engine monitoring.

Diagnostic and fault codes.

OPERATOR’S CAB PROVIDES ERGONOMIC COMFORT AND CONTROL

Extra large windows throughout for excellent visibility.

Excellent ventilation via a large sliding door, side and rear windows, and hinged roof window.

Single or dual axis, electronic operated controller mounted on armrest for outstanding operator comfort.

Tilting and Telescoping steering column.

All gauges, switches, indicators, and controls are located in the operator’s forward line of sight.

All gauges and switches are backlit for excellent visibility in low light conditions.

Link-Belt vision package including winch, right side swing, and rear-view cameras.

In cab comfort is maintained by the standard heater and air conditioning.

Cab mounted amber strobe light.

Internal rated capacity limiter light bars.

Available – External rated capacity limiter light bars.

Available – LED working light on top of cab.

DESIGNED FOR EASY ACCESS AND SERVICE

Access is superb with strategically-located ladders, steps, catwalks and CabWalk.

REVOLUTIONARY HYDROSTATIC DRIVE ON A 6-WHEEL CARRIER

Not only are these cranes easy to get from jobsite to jobsite, they also have extraordinary creep control and jobsite maneuverability, thanks to their hydrostatic powered motors in each wheel. The smaller tires give them an overall height that is ideal for hauling, along with their individual six-wheel hydrostatic drive. There is no crane in the world, any size, that can come close to the job site maneuverability and performance of Link-Belt’s large RTC Series II machines.

On the job, Link-Belt’s large RTC Series II cranes have outstanding on-tire capacity coupled with a long reach, maneuverability, incredible gradeability and low height, making them truly an ideal solution for industrial sites.

Because of the innovative 6x6x6 hydrostatic drive/steer on each wheel, the turning radius of the 30′ 2″ (9.2 m) long carrier is a remarkable 21′ 10″ (6.66 m).

Because it is under 10 ft (3 m) wide and features low overall height, the six-wheel RTC Series II transports easier than the competition.

JOBSITE READY IN LESS THAN AN HOUR

Main unit transports under 100,000 lbs (45 mt)
The RTC installs its own counterweight and outrigger boxes to be jobsite ready. Unlike other big RT’s, boom and tires do not need to be removed. Therefore, the six-wheel RTC Series II is ready to be driven off the transport trailer and begin self-assembly.In less than an hour and without a helper crane, the six-wheel Rough Terrain Crane Series II cranes are ready for work.

Dashboard

RTC 80160

160 ton | 150 mt

Nominal Capacity @ Radius 160 US Tons @ 7′ (145mt @2.1m)
Standard Boom 42.3′-195.3′ (12.9-59.5m)
Telescope System Pin & Latching
Attachment – Option 1 10′-31′-55′ (3-9.4-16.8m) Bi-Fold
Attachment – Option 2 (1) Or (2) Or (3) 18′ (5.5m) Lattice Extensions
Max. Tip Height 311′ (94.8m)
Max. Line Pull 25,955 Lbs. (115.45kN)
Max. Speed (Ft Per Minute) 435 Fpm (132.9m/Min)
  • Full power latching style boom with market leading capacity for its class
  • Innovative 10 ft (3.0m) fly is integral to one of the on-board fly options
  • Over 25 tons (22.68mt) capacity and one-load two-line lift procedures
  • Counterweight consists of modular-style counterweights for multiple transport and lift scenarios
  • Boom wear pads have Teflon pucks that lubricate the boom sections (No grease)
  • Four fly options feature four manual offset positions of 2°, 15°, 30°, and 45° or hydraulic offsets 2° – 45°
  • Next generation operator’s cab with improved visibility and ergonomics
  • Integral air conditioning – optional
  • Proven six-wheel hydrostatic drive with fully independent hydraulic suspension
  • 4-mode steering controlled from the steering wheel
  • Full-length flat deck with integrated steps and handholds
  • Large swing out engine hood doors for ease of service
  • Access ladders and folding guardrails
  • Cameras for right side upper, main and auxiliary winches

Media