BUILT FOR REMARKABLE CONTROL, RELIABILITY AND CAPACITY PERFORMANCE ON ANY TERRAIN

320 hp (239 kW) Cummins QSL Tier 4 Final engine

Variable displacement piston type main pumps with total horsepower control

Main hoists powered through piston motors and winch planetary drums grooved for 7/8″ (22mm) wire rope

22,380 lb (10 151 kg) of line pull

537 fpm (163.7 m/min) of winch speed

Three working gauges

Multiple counterweight configurations

STANDARD WITH:

Upper guardrail

Rear view camera

Winch camera

Hoist drum cable follower

Travel and swing alarm

Cat walks

Assembly RCL capacity chart on jacks

PIN & LATCH BOOM WITH ATTACHMENT FLEXIBILITY

 Ingenious Teflon wear pucks impregnated in the full contact wear pads eliminate the need for greasing the boom.

Quick reeve boom head eliminates the need to remove the becket to change the reeving.

5 extend modes: EM1-EM5 and standard modes enhance both the structural and stability capacity capability and are fully synchronized for normal operation

Manual offset fly: 0°, 15°, 30°, 45°

No deducts for stowed attachments

OPERATOR AID FEATURES

Operator settable alarms with function kick-out include left and right slew angle, maximum & minimum boom angle, head height, load radius, boom length, and operator defined area

HEAVY-DUTY POWER FOR THE MOST DEMANDING JOBS

Low noise, Tier 4 Final Cummins, four stroke diesel with an abundance of horsepower to provide multi-function operation and fast 2.0 mph travel speed. All engine systems are monitored via the on board engine control monitor.

On-demand, direct drive, high pressure variable displacement piston pumpspower the boom hoist function as well as matching front and rear high pressure piston winch motors connected through planetary drives to large diameter grooved drum laggings.

A dedicated hydraulic swing pump feeds two independent swing drive assemblies with open center free swing, providing a smooth glide feel. Both dynamic and static swing brakes are also offered as standard equipment.

Travel propel is achieved through individual side frame-mounted, two-speed, high pressure piston motors / travel reduction boxes with integral travel brake

Oil is cooled by a remote mounted, hydraulic powered, high capacity cooler.

HIGHLY FUNCTIONAL AND COMFORTABLE CAB

Cab tilt to 20 ̊

High capacity air-conditioning

High capacity hot water heating

Six-way adjustable seat

LED service monitor screen provides engine performance and critical data using conventional gauge appearance.Second level provides actual digital values, as well as diagnostic information.

Adjustable armrest console with pilot-operated single-axis or joystick controls

Hydraulic pilot controls for variable hoist, swing and travel performance

Fingertip high speed hoist button for front and rear drum

Rear view and winch view cameras

TOTAL CRANE OPERATING SYSTEM

It aids operators in a safe and efficient operation

TELEMATICS. YOU OWN THE DATA!

CELLULAR-BASED DATA LOGGING AND MONITORING SYSTEM THAT PROVIDES:

Viewing options for sharing data with distributor and Link-Belt

Location and operational settings

Monitor routine maintenance intervals

Crane and engine monitoring

Diagnostic and fault codes

QUICK AND EASY MOBILIZATION

 Transports complete in FOUR OR FIVE LOADS

Main unit transports under 93,600 lbs (42 456 kg)with side frames removed

Four overflow loads under 44,500 lbs (20 185 kg)

Four wide-spread hydraulic jacks for easy sideframe assembly/disassembly

Fold-up catwalks

Dashboard

TCC 1400

140 ton | 127 mt

Base Rating 140 Ton @ 10′(127mt @ 2.3m)
Main Boom Six Section Formed Boom
Length (Min-Max) 42.3′-195.3′(12.9m-59.5m)
Telescope System Pin & Latch
Attachment Option 3 10′-31′-55′(3.0m-9.4m-16.7m) Stowable, 3-Piece Bi-Fold Lattice Fly
Max. Tip Height 257.6′(78.5m)
Engine Make & Model Cummins QSL 9L
Horsepower 320hp(239kW) @ 1,800rpm
Maximum Line Pull 22,380lbs(10,154.4kg)
Max Line Speed No Load 537fpm (163.7mpm)
Standard Upper Weights 57,000lbs (25,854kg)
Standard Lower Weights 25,000lbs (11,339kg)
Main Transport Load 93,600lbs (42,456kg)
Overflow Loads 3-4
  • NEW Fly pinning designed for limited ladder use and ELIMINATES hammering pins
  • Lightweight nylon head sheaves reduce overall machine weight and increase lift capacities
  • Quick reeve boom head with quick reeve block allows rope to be easily reeved over boom head
  • Hammerhead boom nose allows operator to work at high boom angles
  • Greaseless wear pads
  • Optional auxiliary sheave off main boom
  • Pick-and-carry the whole chart
  • List chart selections in LMI
  • Transports complete in FOUR or FIVE LOADS
  • Main unit transports 93,600 lbs (42 456 kg) with sideframes removed
  • Three to four overflow loads under 44,500 lbs (20 185 kg)
  • Four wide-spread hydraulic jacks for easy sideframe assembly/disassembly
  • 2 mph (3.2 kph) high speed travel
  • Fold-up catwalks

Media