DX HYDRAULIC HAMMER

The DX Range of Hydraulic Piling hammers are designed for small bearing piles of steel, timber, concrete and many sheet piles. The DX hammer is available with back guides for operating from a piling mast or a slider when operating from an excavator.

THE HAMMERS HAVE THE FOLLOWING IMPORTANT FEATURES:

Total control of the hammer

Allows precise matching of energy to suit the pile driving requirements

Double acting cylinder produces high impact energy and fast blow rate

Economical – Low Hydraulic power requirements

Available with BSP Hydro-packs for optimum hammer performance

Hammer can be operated directly from hydraulic crane or excavator base

Drives piles with ultimate load bearing up to 1800kN

PILE TYPES

          Typical piles driven singly or in pairs

Most Arcelor AZ and AU14 piles

LX / PU / W Ranges

Hoesch H1200 to H3600

`H’ Piles

HP260 to HP400

USA HP10” to HP16”

Tubes up to 406mm ∅ (16”)

Rail standard 610mm & 762mm ∅ tubes

Plus many others…

Performance Data Ram Mass Max. Impact Energy Blow Rate at Rated Energy Operating Pressure Hydraulic Oil Flow Required
Model Kg KNm Bpm Bar L/Min
DX20 150 20 60 160 130
DX25 2000 25 60 160 150
DX30 2500 30 60 180 170

Dashboard

Specifications * Overall Length DX RT SP * Hammer Width DX RT SP * Hammer Mass DX * Hammer Mass RT * Hammer Mass SP
Model Mm Mm Kg Kg Kg
DX20 4000 600 3900 4350 5500
DX25 4000 600 4500 4950 6000
DX30 4300 600 5500 5750 6800